How To Fix A Rusted Truck Bed

Dustin Hawley | Apr 02, 2021

Truck beds have a difficult life. They live out in the elements, they have things dropped and thrown on them, and generally get beaten up while being the reliable, utilitarian vehicles that they are. Inevitably, this means your truck bed can start rusting out years before the rest of the vehicle begins to show any serious wear.

fix rust on truck bed.jpg

In a perfect world, you could simply weld a metal plate over any holes and call it a day. But welding is dangerous and challenging work if you don’t know what you’re doing. It’s also expensive to hire a professional to do it for you. 

Thankfully, there are some methods you can employ to fix your rusted truck bed without having to come out of pocket too much. Here’s a brief overview of the process.

Prep The Area

The first step to fixing a rusted truck bed is prepping the area and removing all the rust. Only then will you be able to assess the true extent of the damage.

Begin by masking off the area that is unaffected by the rust. Use paper or masking tape, and use a few layers for added protection. You’re going to be using a wire brush and some sandpaper for the rust removal process, and you don’t want to scuff any of the surrounding areas. 

Remove The Rust With Wire Brush Wheel

Once you have fully covered the truck bed areas that have remained intact, use a drill and a wire brush wheel to begin removing the rust. This is an aggressive method that requires quite a bit of elbow grease and manual labor, but the goal is to get the bulk of the rust off as quickly as possible. If you break through the bed or widen a hole a bit in the process, don’t worry. You want to continue until you can no longer take off any more rust.

Sand Down The Remaining Rust

After taking off all that you can, follow up and use some 80-grit sandpaper on any areas where rust remains. Keep in mind; rust can creep under the surface and also affect painted areas. Take off some paint around the edges of the sanded area to ensure you’ve removed the entirety of the rust.

Now, smooth the area with 150-grit sandpaper. This will help paint and patching material to adhere more effectively. 

Wash Off The Dust & Sediment

After you finish sanding, wash the truck bed to remove all sediment and dust that has accumulated, inspecting the truck bed thoroughly to ensure that there is no remaining corrosion.

Use A Chemical Rust Remover Or Rust Restorer

For an added layer of confirmation that you have removed all the rust, you can use a chemical rust remover or rust restorer to be confident the job is complete. If you choose to do so, be sure to follow all the manufacturer’s instructions, especially as it pertains to appropriate protective gear.

Weld Any Needed Patches & Paint The Truck Bed

With the truck bed clean and dry, paint any exposed metal with a rust preventative primer. Make sure you apply an even coat, making sure not to miss around the edges of any holes, including on the bottom of the bed where paint may have gotten chipped off.

If you were going to weld a patch in place, this is the point in the process where you would do that. However, a safer and more accessible alternative for most people is to use body filler.

Apply Body Filler

Body filler is an effective compound for patching holes created by rust and corrosion. But before you mix the filler, you’ll need to apply any patching mesh or other materials that may have been included in your patching kit. Once you have applied the patching mesh, you can begin mixing the filler, ensuring you are doing so according to the manufacturer’s instructions. You must follow these instructions to a tee because if the proportions are wrong, the filler may harden too quickly, or may not harden at all.

Similarly, you’ll want to be aware that the filler will begin setting immediately after you have finished mixing. That means the clock is ticking, so you’re going to want to work quickly. As long as the hole is completely filled, you should be ok. Luckily, you don’t have to worry about it looking esthetically pleasing just yet.

Sand The Patch Down Smooth

It typically takes the filler roughly 2 hours to fully set, but it can vary by material. Once the filler has hardened, sand it smooth with your 150-grit sandpaper. As you work your way down to the body level, use finer grit to smooth the surface further. 

Apply Primer

When the patch is smoothed out to your satisfaction, apply an automotive primer to the patch and all exposed metal. The primer takes about an hour to dry, at which point you will want to sand down the area with 400-grit sandpaper. After you finish sanding, apply a second coat of primer and allow it dry before smoothing again with the same paper.

Restore The Finish

After applying both coats of your primer and smoothing the surface out, let the primer sit overnight, and then wash and dry the truck bed again. Now that you have correctly primed the truck bed, it’s time to repaint it. 

For best results, you will want to apply a total of three coats of paint, sanding with 400-grit in-between coats just as you did with the primer. After finishing the third coat, sand the area smooth again, but use water on the paper to ensure a more delicate finish.

Once the final coat is dry, apply a clear coat to the painted area. This coat is much harder than the paint layer and protects the lower layers from damage. Additionally, it gives your truck bed a slick, shiny appearance.

With the clear coat dry, you can then remove your masking tape and clean the area thoroughly. You can wax the area for added protection and esthetic, but it’s completely optional.

In most cases, a repair of this nature will last for at least five years before needing to be touched up again. That said, it’s wise to check the repaired area periodically to ensure that no new rust is forming, especially during the first year.


Fixing your rusted truck bed is a relatively simple process, but as you can tell from reading this guide, it’s a very time-consuming project. You may have to give up a weekend to complete this task, so keep this in mind when preparing to embark on this endeavor. If the process seems too complicated and you’re unsure of your capabilities, you should take it to a professional body shop. But if you feel up to the task, this basic outline should get you off and running with your rust removal.

Explore new car previews
2023 BMW 3 Series Preview
2023 BMW 3 Series Preview
The 3 Series sedan is vital to BMW’s health. Though the company’s customers have gradually shifted into SUVs such as the BMW X3, the 3 Series remains popular with people who are new to the family and with people who’ve driven BMWs for years.
Read the full review
2023 Land Rover Range Rover Sport Preview
2023 Land Rover Range Rover Sport Preview
The Range Rover Sport is an icon of luxury and off-roading prowess, and for 2023 the SUV enters its third generation. The new model year brings updated styling, clever off-road assist technologies, a range of hybrid engines, and new technology.
Read the full review
2023 GMC Yukon Denali Ultimate Preview
2023 GMC Yukon Denali Ultimate Preview
The GMC Yukon is an icon among American SUVs. The full-size offering has been around for a long time and has grown quite luxurious and tech-forward in recent years. GMC has announced a new trim level for the Yukon that takes luxury and opulence to a new level.
Read the full review
Read all articles

Scroll to the top
New Car Preview
2023 Hyundai Palisade Preview
Most Dependable
2019 Vehicle Dependability: Most Dependable Small SUVs
Most Popular
10 Most Popular Luxury Cars
New Model Update
New for 2019: Toyota Trucks, SUVs, and Vans
New Car Preview
2023 Kia Sportage Preview
More related